Stainless Steel & Silicone Over The Collar ID Tags - Slide-On Style - No Jingle • No Dangle • A Safer ID Tag for Your Pet

No Jingle • No Dangle • A Safer ID Tag for Your Pet

Keep your pet safe with durable stainless steel & silicone slide-on ID tags designed to sit flat against your pet’s collar or harness. These stainless steel & silicone over-the-collar ID tags eliminate the noise and movement of traditional dangling tags while reducing the risk of snagging on everyday hazards.

Unlike hanging tags that swing freely, these ID tags lay flat and stay in place on the collar or harness, making them a safer choice for active pets, sport dogs, working dogs, and companions.

This trusted style is widely used by rescues and sport dog owners across Canada who value safety, durability, and reliability.

Why Choose Over-The-Collar Slide-On ID Tags?

✔ No Jingle - No Noise
Quiet and movement-free. No dangling tags clanking against bowls or crates.

✔ No Dangle - Safer Design
Lays flat against the collar to help reduce snagging on:

• Deck boards
• Fencing
• Heating vents
• Crates
• Kennel equipment
• Outdoor obstacles

✔ Durable Stainless Steel
Each tag is deeply engraved so your pet’s information will not rub off or wear away.

✔ Trusted by Professionals
Used by rescues, trainers, and sport dog handlers across Canada.

Available Sizes

Small — Inside Loop Size: 0.3" (0.8 cm) (approximate)
Medium — Inside Loop Size: 0.6" (1.5 cm) (approximate)
Large — Inside Loop Size: 0.8" (2 cm) (approximate)

The flexible silicone ends are stretchy and will accommodate slightly wider collars and allow the tag to slide over buckles and hardware.

If you're unsure which size to choose, we recommend sizing up or contacting us for assistance:

📧 sales@asecondtime.ca

⚠️ Important:
The silicone is designed to stretch for installation and positioning. Avoid overstretching, as this may cause breakage. In rare cases, breakage may occur due to being caught or snagged - this is an intentional safety feature designed to reduce injury or damage to the animal or collar.

 

Size Selection Guide

Choosing the correct size is simple - just match your collar width to the guide below.

Small Tag - Best for Narrow Collars
Fits collars approximately up to 1/2” wide or smaller

Commonly used for:
• Small dogs
• Puppies
• Cats
• Lightweight or narrow collars

Medium Tag
Fits collars approximately 1/2" to 5/8" wide

Commonly used for:
• Medium-sized dogs
• Everyday pet collars

Large Tag - Best for Wider Collars
Fits collars approximately 3/4" to 1.5” wide (and wider)

Commonly used for:
• Larger dogs
• Working dogs

• Sport dogs
• Heavy-duty collars

Still Unsure?

If your collar width falls between sizes, choose the larger size for easier installation and positioning.   If the collar is wider than 1.5”, the large size will often fit.    The silicone is incredibly stretchy and I do have these on collars as wide as 2.75” with great success.  The stretchy silicone ends help the tag slide over buckles and hardware.Need help? We're happy to assist:
📧 sales@asecondtime.ca

How to Measure Your Collar

It's easy!

1. Measure the width of your collar
2. Refer to the Size Selection Guide
3. Choose the tag size that matches your collar width

Remember - the silicone ends stretch to accommodate slightly wider collars and allow installation over buckles and hardware.When in doubt, size up or contact me for guidance.  

What's Included

• Stainless steel slide-on ID tag with your choice of color of silicone end
• Custom engraving
• One spare silicone end included

Our tags are built for long-term use, with fewer than 1% of the silicone ends requiring replacement.   A spare silicone end is included with each order so you will have a replacement on hand should it break.   Remember, in some situations breakage will occur - this is an intentional feature to help protect the animal from injury or damage to the collar.  

Custom Engraving Details

Each tag accommodates:• Up to 4 lines of text
• Approximately 20 characters and spaces per line
• Clear, permanent, deep engraving that will not fade or wear off

Suggested engraving format:

Pet Name
Address
Phone Number
Alternate Phone Number

Tip:  Often, less engraved text allows for larger, easier-to-read lettering, helping you and your pet be reunited faster.   Want something different engraved?  Contact us with your ideas:    📧 sales@asecondtime.ca

Ordering Instructions

Step 1: Choose your size
Step 2: Choose your color
Step 3: Enter your engraving detailsUp to 4 lines of custom text can be engraved.Please double-check spelling and phone numbers before submitting your order.
Changes cannot be made once your order is placed.

Crafted in Calgary, Alberta 🇨🇦

Each tag is deep engraved in our Calgary, AB workshop - never mass produced.Every piece receives personal, hands-on attention, ensuring consistent quality and durability.Our engraving is done deeply into stainless steel so it:

✔ Will not fade
✔ Will not rub off
✔ Will not wear away

Built to last - just like your pet deserves.

Important Reminder

Please carefully review all engraving details before placing your order.We copy your engraving exactly as submitted, and changes cannot be made once the order is finalized.We are not responsible for spelling or number errors entered during ordering.   

________________________________________

The pictures of this piece are enlarged to show the detail of it. Please refer to the measurements stated in this listing.

Each piece is made by hand.  Slight variances will occur from piece to piece.   This is your assurance of handmade quality. 

Please allow approximately 1 week for us to engrave your tag before it ships out to you.   We try to have all engraving orders out as quickly as possible, and often these tags will ship the same or next business day, however sometimes we need a little extra time.  

PERSONALIZED ITEMS ARE NON REFUNDABLE.   Be sure to double check your message for engraving for ANY possible spelling errors before you submit your order.   Changes can NOT be made once the order is placed.